Pros<\/h3>\n\n\n\n\n- Type 1AA 375-lb load rating<\/li>\n\n\n\n
- 3-in-1 leaning, A-frame, and extension ladder<\/li>\n\n\n\n
- Built-in top cap nestles on inside and outside corners, secures on studs<\/li>\n\n\n\n
- Super-easy adjustments<\/li>\n\n\n\n
- Relatively light at 24.1 pounds<\/li>\n\n\n\n
- Rear rails fit between studs<\/li>\n\n\n\n
- Design puts you closer to walls in A-frame position<\/li>\n<\/ul>\n\n\n\n
Cons<\/h3>\n\n\n\n\n- Highest A-frame height doesn’t let you reach volume ceilings<\/li>\n\n\n\n
- Only two types available right now<\/li>\n\n\n\n
- Extended position doesn’t allow for corner\/stud benefits<\/li>\n<\/ul>\n\n\n\n
Multiple Positions, Easy Adjustments<\/h2>\n\n\n\n
For a ladder, we actually have quite a bit to talk about on the Werner Leansafe X3. Like other 3-in-1 multi-position ladders, it can lean in, stand alone as an A-frame, or flip around to an extension height.<\/p>\n\n\n\n\n![\"\"](\"https:\/\/www.protoolreviews.com\/wp-content\/uploads\/2020\/03\/Werner-Corner-Ladder13-800x600.jpg\")
<\/figure>\n\n\n\n![\"Werner](\"https:\/\/www.protoolreviews.com\/wp-content\/uploads\/2020\/03\/Werner-Corner-Ladder03-800x600.jpg\")
<\/figure>\n<\/figure>\n\n\n\nFolded it’s 6 feet tall and extends out to 9 feet when you swing the rear rails around. For an average person, that’s a 10-foot reach for the first two positions and 13 feet as an extension. I’m 6 feet, 2 inches tall, so my reach is a bit higher.<\/p>\n\n\n
\n![\"Werner](\"https:\/\/www.protoolreviews.com\/wp-content\/uploads\/2020\/03\/Werner-Corner-Ladder10-800x600.jpg\")
<\/figure><\/div>\n\n\nIt took about 5 minutes to fall in love with the Werner Leansafe X3 ladder and it’s all about how you make those position changes. Other ladders we use have spring-loaded pins on the outside of the rails. Werner uses a pinching system in the middle of the rail that lets you release both sides with one hand and it’s SOOOO much easier!<\/p>\n\n\n\n
The other systems force you to change your position around the ladder as you release, adjust, and sometimes pop the pins back in place if they don’t slip in on their own. Werner’s design doesn’t have that kind of issue.<\/p>\n\n\n\n
But Wait, There’s More!<\/h2>\n\n\n\n
We’d have been sold just on the adjustment, but there are several other design features worth pointing out.<\/p>\n\n\n
\n![\"Werner](\"https:\/\/www.protoolreviews.com\/wp-content\/uploads\/2020\/03\/Werner-Corner-Ladder06-800x600.jpg\")
<\/figure><\/div>\n\n\nIn the leaning position, the contact side of the top has a non-marring material covering it. It’s also in a shape that contours to sit nicely on inside corners, outside corners, and even against exposed studs. Unlike Little Giant’s version, there’s nothing to flip out. It’s just there when it’s needed and doesn’t get in the way when it’s not.<\/p>\n\n\n\n
You lose the corner\/stud benefit when the ladder is in the extension position, though. It’s not something that affects a lot of what we do, but you might run into a spot you wish it had the option on warehouse jobs, in large shops, or other high-ceiling structures.<\/p>\n\n\n
\n![\"\"](\"https:\/\/www.protoolreviews.com\/wp-content\/uploads\/2020\/03\/Werner-Corner-Ladder14-800x600.jpg\")
<\/figure><\/div>\n\n\nMost A-frame ladders pivot at the top, but Werner moves the X3’s down one step. Doing that gives you the stability you need while moving the top over the rear rails and closer to the wall or surface you’re working next to.<\/p>\n\n\n\n
The rear rails are also narrower\u2014just 14-1\/4 inches. The width lets you put the ladder between studs while you’re running wire, cable, pipe or other material in the pre-drywall phase.<\/p>\n\n\n\n
Additional Features<\/h3>\n\n\n\n\n- Slip-resistant foot pads<\/li>\n\n\n\n
- Werner Edge360 bracing<\/li>\n\n\n\n
- Electrical-friendly fiberglass frame<\/li>\n\n\n\n
- Certifications: ANSI A14.5 (2007), OSHA<\/li>\n\n\n\n
- Yellow and orange color scheme makes it highly visible while standing out from your other ladder types<\/li>\n<\/ul>\n\n\n\n
\n![\"Werner](\"https:\/\/www.protoolreviews.com\/wp-content\/uploads\/2020\/03\/Werner-Corner-Ladder04-800x600.jpg\")
<\/figure>\n\n\n\n![\"Werner](\"https:\/\/www.protoolreviews.com\/wp-content\/uploads\/2020\/03\/Werner-Corner-Ladder02-800x600.jpg\")
<\/figure>\n<\/figure>\n\n\n\nPricing<\/h2>\n\n\n\n
You can pick up the Werner Leansafe X3 ladder for $248<\/a> which is right around Little Giant’s pricing. Little Giant gives you its Ground Cue feature on the bottom step. It’s helpful, but I like Werner’s adjustment system so much better that it puts the Leansafe in the win column for me.<\/p>\n\n\n\n
Cons<\/h3>\n\n\n\n\n- Highest A-frame height doesn’t let you reach volume ceilings<\/li>\n\n\n\n
- Only two types available right now<\/li>\n\n\n\n
- Extended position doesn’t allow for corner\/stud benefits<\/li>\n<\/ul>\n\n\n\n
Multiple Positions, Easy Adjustments<\/h2>\n\n\n\n
For a ladder, we actually have quite a bit to talk about on the Werner Leansafe X3. Like other 3-in-1 multi-position ladders, it can lean in, stand alone as an A-frame, or flip around to an extension height.<\/p>\n\n\n\n\n<\/figure>\n\n\n\n<\/figure>\n<\/figure>\n\n\n\nFolded it’s 6 feet tall and extends out to 9 feet when you swing the rear rails around. For an average person, that’s a 10-foot reach for the first two positions and 13 feet as an extension. I’m 6 feet, 2 inches tall, so my reach is a bit higher.<\/p>\n\n\n
\n<\/figure><\/div>\n\n\nIt took about 5 minutes to fall in love with the Werner Leansafe X3 ladder and it’s all about how you make those position changes. Other ladders we use have spring-loaded pins on the outside of the rails. Werner uses a pinching system in the middle of the rail that lets you release both sides with one hand and it’s SOOOO much easier!<\/p>\n\n\n\n
The other systems force you to change your position around the ladder as you release, adjust, and sometimes pop the pins back in place if they don’t slip in on their own. Werner’s design doesn’t have that kind of issue.<\/p>\n\n\n\n
But Wait, There’s More!<\/h2>\n\n\n\n
We’d have been sold just on the adjustment, but there are several other design features worth pointing out.<\/p>\n\n\n
\n<\/figure><\/div>\n\n\nIn the leaning position, the contact side of the top has a non-marring material covering it. It’s also in a shape that contours to sit nicely on inside corners, outside corners, and even against exposed studs. Unlike Little Giant’s version, there’s nothing to flip out. It’s just there when it’s needed and doesn’t get in the way when it’s not.<\/p>\n\n\n\n
You lose the corner\/stud benefit when the ladder is in the extension position, though. It’s not something that affects a lot of what we do, but you might run into a spot you wish it had the option on warehouse jobs, in large shops, or other high-ceiling structures.<\/p>\n\n\n
\n<\/figure><\/div>\n\n\nMost A-frame ladders pivot at the top, but Werner moves the X3’s down one step. Doing that gives you the stability you need while moving the top over the rear rails and closer to the wall or surface you’re working next to.<\/p>\n\n\n\n
The rear rails are also narrower\u2014just 14-1\/4 inches. The width lets you put the ladder between studs while you’re running wire, cable, pipe or other material in the pre-drywall phase.<\/p>\n\n\n\n
Additional Features<\/h3>\n\n\n\n\n- Slip-resistant foot pads<\/li>\n\n\n\n
- Werner Edge360 bracing<\/li>\n\n\n\n
- Electrical-friendly fiberglass frame<\/li>\n\n\n\n
- Certifications: ANSI A14.5 (2007), OSHA<\/li>\n\n\n\n
- Yellow and orange color scheme makes it highly visible while standing out from your other ladder types<\/li>\n<\/ul>\n\n\n\n
\n<\/figure>\n\n\n\n<\/figure>\n<\/figure>\n\n\n\nPricing<\/h2>\n\n\n\n
You can pick up the Werner Leansafe X3 ladder for $248<\/a> which is right around Little Giant’s pricing. Little Giant gives you its Ground Cue feature on the bottom step. It’s helpful, but I like Werner’s adjustment system so much better that it puts the Leansafe in the win column for me.<\/p>\n\n\n\n
Multiple Positions, Easy Adjustments<\/h2>\n\n\n\n
For a ladder, we actually have quite a bit to talk about on the Werner Leansafe X3. Like other 3-in-1 multi-position ladders, it can lean in, stand alone as an A-frame, or flip around to an extension height.<\/p>\n\n\n\n Folded it’s 6 feet tall and extends out to 9 feet when you swing the rear rails around. For an average person, that’s a 10-foot reach for the first two positions and 13 feet as an extension. I’m 6 feet, 2 inches tall, so my reach is a bit higher.<\/p>\n\n\n It took about 5 minutes to fall in love with the Werner Leansafe X3 ladder and it’s all about how you make those position changes. Other ladders we use have spring-loaded pins on the outside of the rails. Werner uses a pinching system in the middle of the rail that lets you release both sides with one hand and it’s SOOOO much easier!<\/p>\n\n\n\n The other systems force you to change your position around the ladder as you release, adjust, and sometimes pop the pins back in place if they don’t slip in on their own. Werner’s design doesn’t have that kind of issue.<\/p>\n\n\n\n We’d have been sold just on the adjustment, but there are several other design features worth pointing out.<\/p>\n\n\n In the leaning position, the contact side of the top has a non-marring material covering it. It’s also in a shape that contours to sit nicely on inside corners, outside corners, and even against exposed studs. Unlike Little Giant’s version, there’s nothing to flip out. It’s just there when it’s needed and doesn’t get in the way when it’s not.<\/p>\n\n\n\n You lose the corner\/stud benefit when the ladder is in the extension position, though. It’s not something that affects a lot of what we do, but you might run into a spot you wish it had the option on warehouse jobs, in large shops, or other high-ceiling structures.<\/p>\n\n\n Most A-frame ladders pivot at the top, but Werner moves the X3’s down one step. Doing that gives you the stability you need while moving the top over the rear rails and closer to the wall or surface you’re working next to.<\/p>\n\n\n\n The rear rails are also narrower\u2014just 14-1\/4 inches. The width lets you put the ladder between studs while you’re running wire, cable, pipe or other material in the pre-drywall phase.<\/p>\n\n\n\n You can pick up the Werner Leansafe X3 ladder for $248<\/a> which is right around Little Giant’s pricing. Little Giant gives you its Ground Cue feature on the bottom step. It’s helpful, but I like Werner’s adjustment system so much better that it puts the Leansafe in the win column for me.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/figure>\n<\/figure>\n\n\n\n<\/figure><\/div>\n\n\nBut Wait, There’s More!<\/h2>\n\n\n\n
<\/figure><\/div>\n\n\n<\/figure><\/div>\n\n\nAdditional Features<\/h3>\n\n\n\n
\n
<\/figure>\n\n\n\n<\/figure>\n<\/figure>\n\n\n\nPricing<\/h2>\n\n\n\n